Top 20 Kinedo FAQs

To obtain prices please contact a Kinedo stockist. You can find your nearest stockist by using the stockist locator on this page. Simple enter your postcode and click GO.

A full list of stockists is available on this website. Please contact Saniflo for RRP.

The first thing is to follow the installation instructions. They are very simple to follow as they are mainly pictorial. If, however, you are uncertain at any time please contact our technical helpline. As far as the range of self contained cubicles are concerned there are certain things that need to be heeded.

1. They are all designed to be installed onto and up to finished walls and floors.
2. Silicone should not be applied on any surface of the product as it is not required. Finishing strips are either provided or are available to cover any gap that might occur where the cubicle meets the wall.
3. At least 400mm should be allowed for above the cubicle in order for the support brackets to be fitted correctly.

Depending on the model you choose everything you need to install your shower is included in the box, including the shower tray and waste trap.

Yes it is possible several of the models of self contained cubicles from Kinedo are supplied with shower fittings sothat you can fit either a mechanical shower valve or an electric shower.

No you are doing nothing wrong. The diameter of the waste fitting is 40mm, if you are unable to find any waste pipe of a suitable size then you will need an adapter which will reduce down from 40mm to 1 ½ bsp. These are available from most plumbers merchants and can also be obtained directly from Saniflo.

All Kinedo thermo models require a minimum of 1 bar pressure. Anything below this will result in impaired performance and a shower booster pump may be required. All Kinedo hydro units require a minimum of 2.5 bar pressure to function correctly (maximum 5 bar) Generally all models will function with combi boilers although it is adviseable to check with your boiler manufacturer first.

Exactly what it says. Whenever you see the “No Silicone Required” logo next to a Kinedo product you can be assured that absolutely no sealant is required during the construction and installation of your Kinedo product.

No problem Kinedo offer a 1000mm x 800mm shower cubicle designed specifically to fit against 1 wall, as we have also a cubicle designed to fit with a 3 sided recess.

The best way to clean you Kinedo shower product is with warm soapy water and a cloth or sponge. No abrasive cleaners should be used.

CristalPlus is a factory applied coating to the surface of the glass that helps prevent the build up of limescale which in turn aids cleaning. Particularly useful in hard water areas.

All Kinedo shower enclosures come with a 10 year guarantee against faulty manufacture or defective parts. All Kinedo self contained shower cubicles are covered by a 2 year guarantee against faulty manufacture or defective parts.

Kinedo offer a whole range of door styles. They are: pivot, bifold, sliding and quadrant.

All of the accessories supplied for the Kinedo range is either Moabi, which is a naturally oily wood that has been treated. The other accessories are a soft wood that has also been treated. A teak oil or similar should ensure the long life of these items.